dedecms织梦内容管理系统      
首页 | 新闻资讯 | 实验基础 | 核酸试验 | 蛋白试验 | 动植物 | 生物芯片 | 微生物 | 细胞生物学 | 专题 | 会员中心 | 支持论坛
  当前位置:试验方案>核酸试验>DNA试验>基因组学>文档内容
DNase?I?Footprinting
来源:试验方案 作者: 发布时间:2008-09-06  
你会看到这个提示,那是因为你的系统无法识别某栏目的模型信息,或者你新建模型后,没为这个模型设计单独的模板。不同模型的文档浏览页的模板为:article_模型名字标识.htm 如“article_article.htm”,更多的信息你可以在频道模型管理的地方查看。
body  

An end labeled DNA probe is incubated with a purified DNA-binding factor or with a protein extract. The unprotected DNA is then digested with DNase I such that on average, every DNA molecule is cut once. Digestion products are then resolved by electrophoresis. Comparison of the DNase I digestion pattern in the presence or absence of protein will allow the identification of a footprint (protected region).

1. Make the DNA binding reaction by combining the following components in a microcentrifuge tube:

25 μl of protein extract in HEMG

10 μl of 10% Polyvinyl Alcohol

1 μl of 1 M HEPES, pH 7.6

2 fmol of end-labeled DNA probe (about 1200 cpm)

1 to 5 μg competitor DNA

and bring the final reaction volume to 50 μl with ddH2 O.

2. Mix the components gently and incubate on ice for 10 min (for incubations with purified proteins, incubation temperatures may be increased).

3. Add 50 μl of Ca/Mg Solution to the binding reaction at room temperature.

4. Add 1 to 10 μl of DNase I solution (see Hint #1).

5. Mix quickly and incubate at room temperature for 1 min.

6. Stop the reaction by adding 100 μl of stop solution and mix by vortexing immediately.

7. Add 200 μl of phenol/chloroform and mix by inverting several times. Centrifuge at full speed in a microcentrifuge for 10 min to separate the phases. Recover the aqueous phase and transfer it to a fresh microcentrifuge tube.

8. Add 1 ml of 100% ethanol and mix by inverting several times.

9. Centrifuge at full speed in a microcentrifuge for 10 min to pellet the DNA and remove the ethanol.

10. Resuspend the pellet in 70% ethanol and pellet the DNA again. Remove the ethanol and allow the DNA pellet to air dry.

11. Resuspend the DNA in 6 μl formamide dye and load the sample onto a 6% to 8% sequencing gel (see Protocol on Sequencing Gel Protocol).

Competitor DNA Sonicated Calf Thymus DNA in ddH2 O
Formamide Dye 0.005% (w/v) Xylene Cyanol FF
20 mM EDTA
make up in deionized Formamide
0.005% (w/v) Bromophenol Blue
70% (v/v) Ethanol
1:1 Phenol:Chloroform
Stop Solution 1% (w/v) SDS
0.2 M NaCl
Store at room temperature
20 mM EDTA, pH 8.0
0.25 mg/ml carrier RNA
Ca/Mg Solution 5 mM CaCl2
10 mM MgCl2
DNase I 2.5 mg/ml in ddH2 O
Freeze as 2-5 μl aliquots and store at -70℃
HEMG 0.1 mM EDTA, pH 8.0
0.1 M KCl
25 mM HEPES, pH 7.6 with KOH
12.5 mM MgCl2
10% (v/v) Glycerol
1 mM DTT (add just before use)
1 M HEPES pH 7.6 with KOH
10% (v/v) Polyvinyl Alcohol

Competitor DNA Sonicated Calf Thymus DNA in ddH2 O

Formamide Dye 0.005% (w/v) Xylene Cyanol FF

20 mM EDTA

make up in deionized Formamide

0.005% (w/v) Bromophenol Blue

70% (v/v) Ethanol

1:1 Phenol:Chloroform

Stop Solution 1% (w/v) SDS

0.2 M NaCl

Store at room temperature

20 mM EDTA, pH 8.0

0.25 mg/ml carrier RNA

Ca/Mg Solution 5 mM CaCl2

10 mM MgCl2

DNase I 2.5 mg/ml in ddH2 O

Freeze as 2-5 μl aliquots and store at -70℃

HEMG 0.1 mM EDTA, pH 8.0

0.1 M KCl

25 mM HEPES, pH 7.6 with KOH

12.5 mM MgCl2

10% (v/v) Glycerol

1 mM DTT (add just before use)

1 M HEPES pH 7.6 with KOH

10% (v/v) Polyvinyl Alcohol


[收藏] [推荐] [评论(0条)] [返回顶部] [打印本页] [关闭窗口]  
用户名: 新注册) 密码: 匿名评论
评论内容:(不能超过250字,需审核后才会公布,请自觉遵守互联网相关政策法规。
 §最新评论:
  热点文档
·Gel Shift (EMSA) Protocol
·Electrophoretic Mobility Shift
·电泳迁移实验 EMSA【中国医学科
·EMSA using ds Oligonucleotides
·FOOTPRINTING WITH DNASE1
·AFLP: not only for fingerprint
·RFLP和RAPD技术原理和操作步骤
·DNaseI Footprintint【Harvard U
·DNA fingerprinting - agarose g
·RADIOLABELING OF PROBES FOR EL
  相关文档
·Comparative?Genomic?Hybridizat
·Footprinting?Analysis
·Chromosome (DNA) walking
·FINGERPRINTING?PROTOCOL?(AGARO
·HapMap assay-design protocols
·全基因组的比较基因组杂交技术介
·DNaseI?Footprintint
·多肽抗生素研究进展
·多肽、蛋白质类药物缓释剂型的研
·蛋白多肽类药物的药代动力学分析
  推荐文档
 
Power by DedeCms